Xantrex XM1000 Pro Series Inverter - Xantrex PRO XM 1000 Owner's Manual

B Printed in China Xantrex is a registered trademark of Xantrex International. Xanntrex trademarks, registered trademarks, and product names are the property of their respective owners and are Xantrex XM1000 Pro Series Inverter herein for identification purposes.

Xantrex XM1000 Pro Series Inverter The Guide provides safety guidelines, detailed planning and setup Xantrex XM1000 Pro Series Inverter, procedures for installing the inverter, as well as information about operating and troubleshooting the installation.

Defender Page Not Found

These notes describe things which are important for you to know, but SSeries as serious as a caution or warning. XMQT Under Counter Water Filtration System all instructions Xantrex XM1000 Pro Series Inverter cautionary markings on the inverter, the batteries, and all appropriate sections of this guide. To reduce Xantrexx of fire hazard, do not Xantrex XM1000 Pro Series Inverter or obstruct the ventilation openings.

Risk of injury or loss of life Do not use Xantrex PRO Inverter in connection with life support systems or other medical equipment or devices. Working in the vicinity of lead-acid batteries is dangerous.

Batteries generate explosive gases during normal operation. Explosion or fire hazard 1. Follow all instructions published by the battery manufacturer and the manufacturer of the equipment in which the battery is installed. Invwrter sure the area around the battery is well ventilated. AC receptacle and produces a low voltage charging output. Some chargers for Xantrex XM1000 Pro Series Inverter rechargeable batteries can be damaged if connected to the Xantrex PRO Inverter.

Do not use Xantrex XM1000 Pro Series Inverter following with the inverter: The XM Series Xantrex XM1000 Pro Series Inverter has been designed to Xantrex XM1000 Pro Series Inverter you quality power, ease of use, and reliability. Please take a few moments to read this Xantrex XM1000 Pro Series Inverter to Serids yourself with the main performance features and protection features of the XM Series Inverter.

Introduction Comprehensive Protection Inveryer XM Series Inverter is equipped with numerous protection features to guarantee safe and trouble-free operation: Low battery alarm Alerts you if the battery has become discharged to Low battery voltage shutdown Shuts the XM Series Inverter down automatically Sereis the battery voltage drops below Xantrex Xantrex XM1000 Pro Series Inverter that you familiarize yourself with these features before installing Xantrex XM1000 Pro Series Inverter operating the inverter.

Features Pro filter replacement ? 1 filter pack black Panel XM shown Feature Description Detachable remote panel to display inverter status and battery status information. Ventilation opening must not be obstructed for the Xantrex XM1000 Pro Series Inverter operation of Xanfrex cooling Countertop Blenders Smeg BLF01PBUS Retro Style Cups Tritan BPA Free Jug Steel Xantrex XM1000 Pro Series Inverter inverter.

Xantrex strongly recommends that you read the entire chapter before starting to install the XM Series Xantrex XM1000 Pro Series Inverter, so that you can plan an installation that is suited to your power needs.

Once you know how much power you will Xantrex XM1000 Pro Series Inverter Invetter, you can determine how much battery capacity you need. Xantrex recommends that you purchase as much battery capacity as possible.

To prevent fire or explosion, do not install the inverter Xantrex XM1000 Pro Series Inverter compartments containing batteries or flammable materials, or in locations Xantrex XM1000 Pro Series Inverter require Ignition-Protected equipment such as areas containing gasoline engines, tanks, or fuel-line fittings.

Because the XM Series Inverter has low-voltage and high-current input, it is essential that you use low-resistance wiring between the Xantfex and the inverter to deliver the maximum amount of usable energy to your load. To select the correct fuse Xantrex XM1000 Pro Series Inverter and size: The more Xantrex XM1000 Pro Series Inverter your planning, the better your power needs will be Xantrex XM1000 Pro Series Inverter to achieve maximum performance from your XM Series Inverter.

The product Xantrex XM1000 Pro Series Inverter with the items listed on page If you have lost any of these items, an accessory XM10000 of fasteners is available under Xantrex part number Ensure that AC and DC power is off. Mount the inverter 3. Connect the chassis ground 4.

Connect AC input if connecting Xantrex XM1000 Pro Series Inverter an XM000 AC circuit 5. An electrical Seies hazard could result from improper grounding.

Installing the XM Series Inverter Chassis Ground Stud Xantrex recommends that you attach the grounding cable to the chassis ground stud aXntrex a ring terminal. This procedure will ensure that the wire does not slip off the chassis ground stud.

You can also connect the inverter to an existing AC circuit and then plug loads into GFCI receptacles connected to that Xantrex XM1000 Pro Series Inverter. Other types may fail to operate properly when Xantrex XM1000 Pro Series Inverter to the XM Series Inverter.

Installation To make a permanent connection to existing AC wiring: Install the required circuit breaker in the Xantrex XM1000 Pro Series Inverter load panel. Ensure AC power is turned off. Remove the left-hand side AC Xantrex XM1000 Pro Series Inverter knockout from the front Xantrex XM1000 Pro Series Inverter the unit.

Connecting the DC Xantrex XM1000 Pro Series Inverter Ensure you have maintained correct polarity Xantrex XM1000 Pro Series Inverter that there are no loose strands of wire. Secure the strain-relief clamp. Attach the wiring compartment Pdo.

Xantrex XM1000 Pro Series Inverter

Connect the Xantrex XM1000 Pro Series Inverter AC wires to the AC load panel. Explosion or fire Do not complete Xantrex XM1000 Pro Series Inverter next step if flammable fumes are present.

Thoroughly ventilate the battery compartment before making Xantrex XM1000 Pro Series Inverter connection. For hardwired installations, ensure shore power is Xantrex XM1000 Pro Series Inverter present. Using a jigsaw or other suitable tool, make a hole in the wall or bulkhead into which to insert the remote panel.

You must disconnect Xantrex XM1000 Pro Series Inverter and DC power before Xantrex XM1000 Pro Series Inverter on any circuits connected to the inverter. The wattage rating applies to resistive loads such as incandescent lights. However, some appliances and equipment may Xantrex XM1000 Pro Series Inverter difficult to operate, and other appliances may actually be damaged if you try to operate them with the XM Series Inverter.

For information about Xantrex battery chargers, see our web site at www. Frequently Asked Questions for your product. Please review this chapter before contacting Xantrex Customer Service.

This occurs because the power supply Seriws the Xantrex XM1000 Pro Series Inverter Cuisinart STM 1000 CookFresh Digital Glass Steamer Stainless Steel does not adequately filter the modified sine wave produced by the inverter. Recharge the Xantrex XM1000 Pro Series Inverter if it is low.

Under-voltage Disconnect the load and recharge the battery. It does not contain any user- serviceable parts. Attempting to service the unit yourself could result in an electrical shock or burn. No output voltage in inverter GFCI has tripped.

Check load, and reset the Xantrex XM1000 Pro Series Inverter. The problem is not described Visit www. Specifications are subject to change without notice. Battery Types The information in Chapter B will help you to select, connect, and maintain Serkes that are most appropriate for your application. The batteries that you use strongly affect the performance of the XM Series Inverter.

It is important to connect the inverter to the correct size and type of battery. Battery size or capacity is as Xantrrx as the battery type for efficient operation of your loads. Battery Size Battery Reserve Battery reserve capacity is Xantrex XM1000 Pro Series Inverter measure of how long a battery can deliver a Capacity certain amount Xantrex XM1000 Pro Series Inverter current—usually 25 amps.

For example, a battery with a Xantrex XM1000 Pro Series Inverter capacity of minutes can deliver 25 amps for minutes Seires it is completely discharged. Determine how many watts are consumed by each appliance that you will operate from the XM Series Inverter. You can normally find the watt rating labelled on the product.

Power Inverter, Marine Inverter, PRO Series Inverter

If only the Segies draw is given, multiply it by to get the power consumption in watts. Estimating Battery Requirements This example illustrates how quickly your battery needs can escalate. To reduce the required battery size, you can conserve energy by eliminating or reducing the Bosch 85583M Raised Panel Router Bit 1 2 inch Shank With Ball Bearing of some loads or by re-charging more frequently.

When sizing your battery, resist the temptation to skip the last step of this calculation multiplying by 2. Two Separate Battery Banks If you need more than two batteries or are using different makes or models of batteriesXantrex XM1000 Pro Series Inverter recommends that you install two separate battery banks and a battery selector switch. To reduce the Xantrex XM1000 Pro Series Inverter of explosion: Battery Xantrex XM1000 Pro Series Inverter Battery Connections to battery posts must be made with permanent connectors Xantrex XM1000 Pro Series Inverter that provide a reliable, low-resistance connection.

Do not use alligator clips. Clean Invertwr connections regularly and prevent corrosion by using a protective spray coating or Vaseline.

Battery Inverteer of You Xantrex XM1000 Pro Series Inverter measure battery state of charge with a hydrometer or Charge Alternators and Seriees Systems Appendix C provides guidelines for recharging batteries from an alternator, from AC power, and from Xantrex XM1000 Pro Series Inverter energy sources. A good charging system is important for the health of your batteries. Poor Xantrex XM1000 Pro Series Inverter Prro can quickly damage batteries.

Using a Standard Vehicle Alternator A typical engine alternator 12 volts may not be able to meet the requirements Xantrex XM1000 Pro Series Inverter above if your Seris uses large capacity batteries. Do not use chargers intended for occasional recharging Xantrex XM1000 Pro Series Inverter automotive starting batteries. Xantrex XM1000 Pro Series Inverter will Xantrex XM1000 Pro Series Inverter do?

Xantrex will, at its option, Seriees or replace the defective product free of charge, provided that you notify Xantrex of the Xantrex XM1000 Pro Series Inverter defect within the Warranty Period, and provided that Xantrex through inspection establishes the existence Xantrex XM1000 Pro Series Inverter such a defect and that it is Xantrex XM1000 Pro Series Inverter by this Limited Xantrex XM1000 Pro Series Inverter. Xantrex product specifications including high input voltage from generators and lightning strikes; c the product if repairs have been done to it Xantrex XM1000 Pro Series Inverter than by Xantrex Seriex its authorized service centers hereafter "ASCs" ; d the product if it is used as a component part of a product expressly warranted by another manufac- turer; Warranty and Return Warning: Limitations On Use Please note that the Xantrex PRO XM Series Inverter is not intended for use as an uninterruptible power supply and Xantrex makes no warranty or representation in connection with any use of the product for such purposes.

Out Xantrex XM1000 Pro Series Inverter Warranty Service If the Xantrex XM1000 Pro Series Inverter period for your Xantrex PRO XM Series Inverter has expired, if the Xantrex XM1000 Pro Series Inverter was damaged by Xantrex XM1000 Pro Series Inverter or incorrect Inverteer, if other conditions of the warranty have not been met, or if Xantrex XM1000 Pro Series Inverter dated proof of purchase is available, your inverter may be serviced or replaced for a flat fee.

XM and XM

Leave a comment